+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: Backlight Timer Setting Not Working T28P (/showthread.php?tid=3379)
Backlight Timer Setting Not Working T28P - Rayfield - 03-03-2015 03:40 AM
I'm trying to set up the provisioning template for the T28P phone for 3CX.
I'm setting the parameter "phone_setting.backlight_time" to "1".
When I reprovision a phone with this template, the backlight is set to 'off'.
I've tried changing this value to "0" and to "30", but nothing works correctly. It always stays off, even during a call.
I also tried to 'hard code' settings for the Line buttons on my T28, in the provisioning template. But, these won't program, either.
I just updated the firmware in my T28P to 2.73.0.40. Is this a 'bug' in this version of firmware for the T28P?
John Rayfield, Jr.
RE: Backlight Timer Setting Not Working T28P - James_Yealink - 03-09-2015 11:20 AM
Hi John,
Sorry for the late.
I just test in my side, the autoprovision parameter work in T28. Can you try a resetting then do provision again?
Regards,
James