T46G + Plantronics CS510 - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Accessories (/forumdisplay.php?fid=28) +--- Thread: T46G + Plantronics CS510 (/showthread.php?tid=3335) |
T46G + Plantronics CS510 - ronnyg - 02-20-2015 12:54 AM Hi, we setup a T46G (latest firmware available) and EHS36 - adapter (3.16 release) with a Plantronics CS510. All is working fine, but one big problem. If there is an incoming call, you just here 3 x biep tone, not the current ring tone. And the volume is low. We tried to modify volume on phone and on base station - no success. Is there any chance to get it louder and to hear the ringtone? Second problem: It is just possible to get the ring on the phone OR in the headset. On grandstream/snom, you can enable both. Is this possible, too? We did not found out. If it is not possible, may it be possible to be a new feature soon? Thanks Ronny Additional info: It is NOT a problem with the audio jack like some old postings where found. |