EHS36 and T42G - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Accessories (/forumdisplay.php?fid=28) +--- Thread: EHS36 and T42G (/showthread.php?tid=3334) |
EHS36 and T42G - BigTex88 - 02-20-2015 12:11 AM I have a T42g and an EHS36 using a Savi 710 head set. EHS hardware: 48.0.0.0 EHS firmware: 1.16.0.0 T42G firmware: 29.72.0.1 T42G hardware: 29.1.0.0.0.0 I have the EHS36 connected with the RJ12 to the phone and the 3.5mm to the savi. The phone will see the headset and when I press the button on the phone to get a line out it does. But I don’t hear anything. No sound at all on my end or the other end. How do I fix this. RE: EHS36 and T42G - CWR - 02-20-2015 12:42 AM Is the Plantronics cable connected from Plantronics to the Headset jack on the T42? [attachment=1318] RE: EHS36 and T42G - ronnyg - 02-20-2015 11:30 AM You should upgrade your EHS firmware. EHS firmware: 1.16.0.0 Current Is 3.16 ;-) |