T28P Constant Ring Instead of DialTone - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +---- Forum: T2xP Series (/forumdisplay.php?fid=21) +---- Thread: T28P Constant Ring Instead of DialTone (/showthread.php?tid=3314) |
T28P Constant Ring Instead of DialTone - kruoll - 02-13-2015 02:55 AM Hello, I have a mix of Yealink phones... T22, T26, and T28P. T22 and T26 get a standard dial tone, but all T28P make a ringing noise when picking up the line. All are configured in Elastix 2.0.0-63. I have tried factory reset. The phone operates as normal both inbound and outbound, except for this strange dial tone. Any ideas? Thanks for your input. RE: T28P Constant Ring Instead of DialTone - kruoll - 02-13-2015 05:37 AM Answer was to go to Settings and Tones and Set the country from Australia to US.... RE: T28P Constant Ring Instead of DialTone - James_Yealink - 02-13-2015 03:24 PM Nice to hear the issue is solved. Our technist also send a mail to you. Regards, James |