+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+--- Thread: DSS key programmed as DTMF, going too fast (/showthread.php?tid=3290)
DSS key programmed as DTMF, going too fast - shmuel@birns.net - 02-10-2015 04:23 AM
I have a park feature on my hosted platform that while on the call, you press the star key 3 times and the call gets parked. I made one of the DSS buttons a DTMF button dialing ***. It works most of the time, but sometimes my system only registers two stars. Is there a way to delay the start of the first star?
RE: DSS key programmed as DTMF, going too fast - James_Yealink - 02-10-2015 11:40 AM
Hi,
What's your phone firmware? Please upgrade to latest and check again.
If the problem persit please adjust the DTMF duration through below parameter(the parameter is only applicable in firmware version higher than V73):
features.dtmf.duration =
It range from 40 ~ 300, default value is 80.
Regards,
James
RE: DSS key programmed as DTMF, going too fast - shmuel@birns.net - 02-10-2015 11:23 PM
I should make it higher or lower? I am guessing higher.
RE: DSS key programmed as DTMF, going too fast - James_Yealink - 02-11-2015 09:50 AM
You should make it lower.
The duration time should be shorter than the internal of two DTMF input.