How To Disable Ring Back Tone in Yealink W52P - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: Dect Phone Series (/forumdisplay.php?fid=6) +--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23) +--- Thread: How To Disable Ring Back Tone in Yealink W52P (/showthread.php?tid=3285) |
How To Disable Ring Back Tone in Yealink W52P - rizvirgo - 02-09-2015 01:24 PM Hello Team, Will you please guide me how to disable ring back tone in yealink w52p? I have selected the region Australia. But when I select Custom it gives fields to edit but do not know what to write in that fields. Guide me Thanks in advance. RE: How To Disable Ring Back Tone in Yealink W52P - rizvirgo - 04-09-2015 08:35 AM Hello Team, Anyone can reply to the above post, Thank you RE: How To Disable Ring Back Tone in Yealink W52P - complex1 - 04-10-2015 02:14 AM Hi, I have found this for you: Customizes the dial tone. tonelist = element[,element] [,element]… Where element = [!]Freq1[+Freq2][+Freq3][+Freq4] /Duration Freq: the frequency of the tone (ranges from 200 to 7000 Hz). If it is set to 0Hz, it means the tone is not played. A tone is comprised of at most four different frequencies. Duration: the duration (in milliseconds) of the dial tone, ranges from 0 to 30000ms. You can configure at most eight different tones for one condition, and separate them by commas. (e.g., 250/200, 0/1000, 200+300/500, 600+700+800+1000/2000). If you want the IP phone to play tones once, add an exclamation mark “!” before tones (e.g., !250/200, 0/1000, 200+300/500, 600+700+800+1000/2000). Hope it help. RE: How To Disable Ring Back Tone in Yealink W52P - rizvirgo - 04-10-2015 10:38 AM (04-10-2015 02:14 AM)complex1 Wrote: Hi, Hello Team, I am looking for this thank you |