Yealink Forums
Feedback - Firmware 35.8.0.50 - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: Skype for Business/Lync (/forumdisplay.php?fid=48)
+--- Forum: T48G (/forumdisplay.php?fid=49)
+--- Thread: Feedback - Firmware 35.8.0.50 (/showthread.php?tid=32707)

Feedback - Firmware 35.8.0.50 - Matthias. - 10-25-2016 02:30 PM

Hi,

thanks for a new firmware. Refering to my feedback on firmware 35.8.0.50 here is my feedback about the latest firmware.

- Calls only displayed as number and not as Conatct from Outlook, Exchange or LDAP even with BToE. We found out that the name of the incoming caller is only displayed if the number is saved without the country code.

Our numbers are all stored in E.164 format an this won't work. -still not working-

- Playing voicemails calls the Exchange Voicemailbox and you need the pin. On the Lync phone edition you can play directly without pin. -still not working-

I would very much appreciate a feedback.

Thanks

RE: Feedback - Firmware 35.8.0.50 - Travis_Yealink - 03-17-2017 06:36 AM

(10-25-2016 02:30 PM)mk-ask Wrote:  Hi,

thanks for a new firmware. Refering to my feedback on firmware 35.8.0.50 here is my feedback about the latest firmware.

- Calls only displayed as number and not as Conatct from Outlook, Exchange or LDAP even with BToE. We found out that the name of the incoming caller is only displayed if the number is saved without the country code.

Our numbers are all stored in E.164 format an this won't work. -still not working-

- Playing voicemails calls the Exchange Voicemailbox and you need the pin. On the Lync phone edition you can play directly without pin. -still not working-

I would very much appreciate a feedback.

Thanks

Hi,

Sorry for late reply.
Please test our new firmware and new BToE, download page as below:
http://www.yealink.com/solution_info.aspx?ProductsCateID=1471&cateid=1471&BaseInfoCateId=1328&Cate_Id=1471&parentcateid=1328

If the issue still exist, please send an email to support@yealink.com, we might need more detail/trace files to help you locate the issue.

Regards,
Travis