+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Yealink T46G (/showthread.php?tid=31906)
Yealink T46G - Nanna - 10-22-2016 03:23 AM
Hi All
I have been searching for an solution on how to reset the Default Admin password - Its lost.
I have been following the guides on this forum, but haven't succes doing so.
I'v set up an tftp server, and played around with different cfg files.
How do I get the phone to read the cfg file?
And what is the excat content of the file, and name of the file.
Hope someone can help me out, im stuck
RE: Yealink T46G - Nanna - 10-23-2016 01:13 AM
(10-22-2016 03:23 AM)Nanna Wrote: Hi All
I have been searching for an solution on how to reset the Default Admin password - Its lost.
I have been following the guides on this forum, but haven't succes doing so.
I'v set up an tftp server, and played around with different cfg files.
How do I get the phone to read the cfg file?
And what is the excat content of the file, and name of the file.
Hope someone can help me out, im stuck
SOLVED!
Disconnecting the phone from network, external PSU.
Did factory reset ( Long hold "ok" for 10 sec)
Blocked the phone from internet, so it cant retrieve the cfg. from the old installation.
Reconnecting the phone let it boot and retrieve the new cfg from your PBX (My case 3CX)
Rennonect internet, and all works like a charm
