+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: BLF List with call pickup and speed dial (/showthread.php?tid=319)
BLF List with call pickup and speed dial - CraigFox - 04-02-2013 08:50 AM
I have successfully enabled the BLF List features of the T38G. I have had no luck enabling the most commonly used features with BLF, Call Pickup and Speed Dial.
Basically with BLF monitoring, when the line rings, pressing the DSS Key should issue a call pickup request and, when the line is idle, pressing the button should issue a speed dial request.
I am using a BroadWorks system with the BLF application configured.
RE: BLF List with call pickup and speed dial - Yealink Support - 06-06-2013 03:17 PM
Hi CraigFox,
1. Do you use our latest firmware?
http://www.yealink.com/Upload/firmware/T3X/38.70.0.125.zip
2. Do you fill the pickup code in the webpage-Account-Advanced
(As the attachment)
3. For BroadWorks, i think BLF and BLF list is the same feature, isn't it?