+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: T20P Call Timeout about 3 minutes (/showthread.php?tid=3139)
T20P Call Timeout about 3 minutes - belio - 01-13-2015 05:27 PM
Hello,
I am getting CALL TIMEOUT in the screen of my T20P about 3 minutes after calling any number. it drops the call and thats it.
I want to disable this feature or change the value.
¿Where can I make this changes?
Thank you!
RE: T20P Call Timeout about 3 minutes - James_Yealink - 01-14-2015 03:19 PM
Hi,
Please upgrade to V73 firmware then change this value through autoprovision:
autoprovision parameter:
account.1.ringback_duration_time =
The default value is 180.
V73 firmware: ftp://yealinkftp:yealinkftp@ftp.yealink.com/firmware/9.73.0.40.rom
Regards,
James
RE: T20P Call Timeout about 3 minutes - belio - 01-15-2015 05:09 PM
(01-14-2015 03:19 PM)Yealink_James Wrote: Hi,
Please upgrade to V73 firmware then change this value through autoprovision:
autoprovision parameter:
account.1.ringback_duration_time =
The default value is 180.
V73 firmware: ftp://yealinkftp:yealinkftp@ftp.yealink.com/firmware/9.73.0.40.rom
Regards,
James
Hi James,
I am tryingo to do that change but I am a very beginer user. Is it possible to do that in the web interface or I have to do it with cfg file?
In that case could you explain to me how to do it?
Thank you.
RE: T20P Call Timeout about 3 minutes - James_Yealink - 01-15-2015 05:26 PM
This can't be adjusted in web interface. What's the value you want to set? I can create a configuration file for you.
RE: T20P Call Timeout about 3 minutes - belio - 01-15-2015 05:32 PM
I think I found how to. I've exported the cfg file and then added this line
account.1.ringback_duration_time = 3600
It seems to work prefectly now.
Thank you so much!
RE: T20P Call Timeout about 3 minutes - James_Yealink - 01-15-2015 05:44 PM
Nice to hear that.
Any question welcome to contact us.
Regards,
James