T46G pfSense OpenVPN - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: T46G pfSense OpenVPN (/showthread.php?tid=3124) |
T46G pfSense OpenVPN - yassin_lahlou - 01-10-2015 11:35 PM hello, has anyone configer a working vpn with a t46g and pfsense, i have read all out over the internet and used this guide http://www.sunstatetechnology.com/docs/YealinkOpenVPNGuide.pdf but with no luck. i have tested the vpn server with my mobile phone and that works fine. i also changed the file names from Client1 to Client en repacked the tar with 7 zip. i hope anybody can helps me Tanks a lot RE: T46G pfSense OpenVPN - James_Yealink - 01-12-2015 11:20 AM Hi, Have you read our OpenVPN guide? If not, please have a view firstly. http://www.yealink.com/Upload/T2X/20131125/OpenVPN_Feature_on_Yealink_IP_Phones.pdf If it still doesn't work. Can you export vpn.tar file to us for a check? You can mask private information. And please get a level 6 syslog by follow step: 1. Import your tar file to phone. 2. Go to setting-> configuration, set the syslog level to 6. 3. Phone will automatically reboot. After rebooting export the syslog to us. Regards, James RE: T46G pfSense OpenVPN - bchow - 04-22-2015 01:01 PM (01-12-2015 11:20 AM)Yealink_James Wrote: Hi,I'm having the same issue, and have read both the OP's document and the Yealink docs. As the OP, I can connect with on my cell (android) and register with a sip client such as Bria. OpenVPN server versions is 2.3.6 Attached vpn conf, server conf, and syslog RE: T46G pfSense OpenVPN - gertjan - 12-01-2015 01:13 AM Did you resolve the issue? Because i have also problems with this. |