+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Configure Router Password (/showthread.php?tid=3104)
Configure Router Password - WilliamCampbell - 01-07-2015 11:34 AM
Hi, the router that I must use for my SIP T20 requires a password for login.
On my laptop, this is no problem, i get a page to input in in a web browser.
How is it possible to input this username and password on the phone, so that the phone can log in and get internet access?
RE: Configure Router Password - Yealink_Daniel - 01-07-2015 05:02 PM
Dear William,
If you are using an xDSL modem, you can connect your phone to the Internet via PPPoE mode.
You can follow these steps to configuring the network via web user interface.
1. login the website of the phone
2. Click on Network->Basic->IPv4 Config
3. Click PPPoE and enter user name and password
4. Click Confirm
For more information, please refer page 4 of our Quick Start Guide of the website.
Link: Yealink SIP-T20P Quick Start Guide V73_40
If there is any questions, please do not hesitate to contact me.
Thank you.
Best Regards