+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Ringing on second call - 3CX (/showthread.php?tid=3100)
Pages: 1 2
RE: Ringing on second call - 3CX - James_Yealink - 03-04-2015 06:37 PM
Hi Don,
OK, we have confirmed that the feature will be added in V81. So now please just wait V80 and then V81. If get the time frame of V81
I will let you know.
Regards,
James
RE: Ringing on second call - 3CX - Fez - 06-02-2015 10:45 PM
We're going to be deploying 3CX in a similar set up and will need this feature too. Will this thread be updated when V81 is confirmed to offer this option and be available?
RE: Ringing on second call - 3CX - A.BVComm - 11-16-2015 11:30 PM
After upgraded to V80 or V81, do we have to program something or it's already programmed and should ring on second incoming call?
RE: Ringing on second call - 3CX - James_Yealink - 11-17-2015 03:02 PM
Hello, there will be an option in V81 firmware. You should configure it.
RE: Ringing on second call - 3CX - jasril - 04-26-2017 11:00 PM
(11-17-2015 03:02 PM)wujs Wrote: Hello, there will be an option in V81 firmware. You should configure it.
havent been able to find this feature, where is it documented?
RE: Ringing on second call - 3CX - Rory - 05-11-2017 07:45 AM
Has this feature been added to v81? If so could someone tell me the CFG Configuration line please.
RE: Ringing on second call - 3CX - AIR Technology Services - 06-22-2017 07:53 PM
I reached out to Support pointing them to this thread and they said:
"Now V81 didn't add this feature. So now we can only change the frequency of call waiting, please see attached guide. In phone webUI path: webUI>>settings>>tones>>call waiting"
RE: Ringing on second call - 3CX - Chris Barron - 06-24-2017 05:05 PM
I have a workaround fix for this, as follows.
Register a second line to the phone, to illustrate, label it "overflow'
Turn off call waiting on the first line and allow secondary calls to route to the overflow line (Divert/ring group/group hunt)
Rather than configure the second line with its own key, configure it as BLF with ring.