Transfer problem when you have more than 1 incoming call - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: General topics (/forumdisplay.php?fid=15) +--- Thread: Transfer problem when you have more than 1 incoming call (/showthread.php?tid=306) |
RE: Transfer problem when you have more than 1 incoming call - jason.luka - 07-02-2013 11:41 PM I am having the same problem, where operators are very difficult to quickly trasferir links to other extensions. RE: Transfer problem when you have more than 1 incoming call - jason.luka - 07-05-2013 01:35 AM This problem occurs in models T22, T26 and T28 we use in the company. RE: Transfer problem when you have more than 1 incoming call - Yealink Support - 07-05-2013 11:34 AM Our product department will evaluate this. Thanks. RE: Transfer problem when you have more than 1 incoming call - Yealink Support - 07-17-2013 08:41 AM Hello all, Good news for you. Our V70 firmware already supported this feature, you just need to disable " Allow Trans Exist Call" in the webpage-Phone-Features-General information Please have a try. Thanks. RE: Transfer problem when you have more than 1 incoming call - stefan@nunetworx.com - 07-18-2013 03:46 AM Thanks! Works great, the option was right there all along Auto provision directive is "transfer.multi_call_trans_enable = 0" btw. RE: Transfer problem when you have more than 1 incoming call - Yealink Support - 07-18-2013 02:42 PM Thanks for your sharing, Stefan RE: Transfer problem when you have more than 1 incoming call - ctiefel - 03-15-2014 01:27 AM I am not seeing this setting on the T38G in the .70 firmware. RE: Transfer problem when you have more than 1 incoming call - Yealink Support - 03-15-2014 10:55 AM Sorry. We don't add this to T38G yet. I have submitted to our R&D. RE: Transfer problem when you have more than 1 incoming call - ctiefel - 03-18-2014 04:31 AM Then what should I do? I have a client that needs this deactivated because it is causing an issue with transferring calls. RE: Transfer problem when you have more than 1 incoming call - jasit - 03-19-2014 12:04 AM Hi, When it's added to the T38 can it also include the multicasting, so can I please assume it will go as a fix to version 38.70.1.6 |