Yealink Forums
Yealink T28 and Raspbian PI - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Yealink T28 and Raspbian PI (/showthread.php?tid=3047)



Yealink T28 and Raspbian PI - troosters - 12-24-2014 07:41 PM

Hello,
is there a way I can use a browser on my Raspberry PI (with RASPBIAN OS) to view the interface of my Yealink T28 Phone.
I want to change the setting of Allowing ALL security certificates and maybe also the Autoprovisioning URL
But there is no pc connected on the network, so I need to either go to the client.
But easier would be if I can do it from with the Rapsberry SSH terminal


RE: Yealink T28 and Raspbian PI - James_Yealink - 12-25-2014 04:45 PM

Hi Troosters,

Sorry for that I don't know much about the Raspberry PI. I just seach it in internet and know it's a mini PC.

You can't do it through SSH which is not supported by phone.
Can a standard internet browser be installed in the Raspberry PI? If yes you should be able to access phone web UI through a standard HTTP protocol.

If you want to change the autoprovision URL you can directly do it through phone LCD. Menu-> Setting-> Advanced Settings-> Auto Provision.
But "Allowing All secuirty certificate" can't be configured in phone LCD.

Regards,
James