+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: Enabling Remote Phone Book via Config File (/showthread.php?tid=3007)
Enabling Remote Phone Book via Config File - moosemasterson - 12-16-2014 12:25 AM
Hi,
I have been trying to set up some T19p's and T26p's on the network and I need to have it so that Remote Phone Book is enabled via the config file but I can't seem to find a setting to change this.
The Auto Provisioning that is currently set up does not have this setting and it still allows the local directory which needs to be disabled. Does anyone know if there is a specific setting to change these via the config file or would I have to web interface directly into each phone to change it?
RE: Enabling Remote Phone Book via Config File - CWR - 12-16-2014 02:06 AM
Look at the "Remote Phonebook" section of the "Common.cfg" file of item 9 - "Auto Provisioning Template" here:
http://yealink.com/SupportDownloadfiles_detail.aspx?CateId=334&flag=142
RE: Enabling Remote Phone Book via Config File - tb303 - 12-17-2014 12:23 AM
Think you missed the question:
Quote:The Auto Provisioning that is currently set up does not have this setting and it still allows the local directory which needs to be disabled. Does anyone know if there is a specific setting to change these via the config file or would I have to web interface directly into each phone to change it?
I have the same problem with the T41P/T42G where the remote phonebook is disabled in the menu by default and the only way to enable it seems to be the web gui.
RE: Enabling Remote Phone Book via Config File - bart2puck - 03-20-2015 03:35 AM
Did either of you get this resolved?
RE: Enabling Remote Phone Book via Config File - Elaine_Yealink - 03-20-2015 04:34 AM
(12-16-2014 12:25 AM)moosemasterson Wrote: Hi,
I have been trying to set up some T19p's and T26p's on the network and I need to have it so that Remote Phone Book is enabled via the config file but I can't seem to find a setting to change this.
The Auto Provisioning that is currently set up does not have this setting and it still allows the local directory which needs to be disabled. Does anyone know if there is a specific setting to change these via the config file or would I have to web interface directly into each phone to change it?
Dears,
To configure the Directory list by auto provisioning, we need to use a XML file named favorite_setting.xml, which is included in the auto provision template. Please find the attached FAQ for detail information.
Best Regards
Elaine
RE: Enabling Remote Phone Book via Config File - tb303 - 03-20-2015 05:43 PM
Thanks, this information would have been very welcome a few months ago
Dear,
We are now preparing Yealink Wiki module and writing FAQ for users. This configuration will be included. If you have any question that want us to provide a FAQ, please do let us know. We will warmly welcome your request.
Regards
Elaine
RE: Enabling Remote Phone Book via Config File - sbsllc - 04-11-2018 02:06 PM
For those looking for this information in more recent years, it can be found here: http://support.yealink.com/faq/faqInfo?id=61
I'm also attaching files with my working config.
Make note of this setting that evaded me at first:
directory_setting.url = http://10.0.0.21/yealink/favorite_setting.xml