+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: T48G Display Missed Call Popup key for provisioning (/showthread.php?tid=2981)
T48G Display Missed Call Popup key for provisioning - tomp - 12-10-2014 10:07 PM
Hi,
How do I turn off the feature called "Display Missed Call Popup" via provisioning file?
Thanks
RE: T48G Display Missed Call Popup key for provisioning - Yealink_Jim - 12-11-2014 02:08 PM
Hi,
This feature is base on V73, given below is the configuration parameters:
------------------------------------------------
#!version:1.0.0.1
features.missed_call_popup.enable=0
------------------------------------------------
Hope this helps!
RE: T48G Display Missed Call Popup key for provisioning - tomp - 12-11-2014 06:39 PM
Where is v73 firmware available from?
RE: T48G Display Missed Call Popup key for provisioning - James_Yealink - 12-11-2014 08:35 PM
Hi Tomp,
You can find firmware and Administrator/Autoprovision guide in this post:
http://forum.yealink.com/forum/announcements.php?aid=8
Regards,
James
RE: T48G Display Missed Call Popup key for provisioning - tomp - 12-11-2014 08:36 PM
So presumably as its beta its not suitable for production use yet?
Any ideas when it will be released as stable?
RE: T48G Display Missed Call Popup key for provisioning - James_Yealink - 12-11-2014 09:06 PM
Officialy it's not recommended using this firmware for production. But there are no much bug found in this firmware yet.
We expect the stalble firmware within a month.