Yealink Forums
Initiate Feature via DSS + Ext via user input on dialpad - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Initiate Feature via DSS + Ext via user input on dialpad (/showthread.php?tid=2962)



Initiate Feature via DSS + Ext via user input on dialpad - deli@ccr1.com - 12-05-2014 09:43 PM

How can I implement a PBX feature (*90 for ex for Intercom) via a DSS key but allow the user then to enter the Ext via the dialpad? I don't have enough buttons to hard-code all Ext's that need Intercom'd to individual buttons.

Currently trying to use a SpeedDial as DSS Type, *90 as Value. When pressed though the *90 is sent to the PBX (asterisk) without waiting for Dialpad input of the Ext #.


RE: Initiate Feature via DSS + Ext via user input on dialpad - James_Yealink - 12-05-2014 09:53 PM

Hi Deli,

Please try a prefix dsskey.
It will allow you to dial a extension followd the prefix.

Regards,
James