Yealink Forums
Remote dialing V80 firmware - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Remote dialing V80 firmware (/showthread.php?tid=29267)



Remote dialing V80 firmware - edrobal - 10-06-2016 10:22 PM

Hello
We use telify for firefox for remote dialing. With old V73 firmware this function without problem but after upgrading to V80 firefox ask for username/password after clicking on tel number.
The syntax used by telify is :
http://[phone ip]/servlet?p=login&q=login&username=[username]&pwd=[password]&jumpto=URI&key=number=[number]&outgoing_uri=[account]

Is there a problem in V80 or a change to syntax?

Thanks


RE: Remote dialing V80 firmware - Kevin_Yealink - 10-11-2016 04:51 PM

(10-06-2016 10:22 PM)edrobal Wrote:  Hello
We use telify for firefox for remote dialing. With old V73 firmware this function without problem but after upgrading to V80 firefox ask for username/password after clicking on tel number.
The syntax used by telify is :
http://[phone ip]/servlet?p=login&q=login&username=[username]&pwd=[password]&jumpto=URI&key=number=[number]&outgoing_uri=[account]

Is there a problem in V80 or a change to syntax?

Thanks

Hi

This is Kevin from Yealink support team, nice to know you.

For the issue, so when you enter the syntax, it still need you input the password? right?
 http://10.2.10.13/servlet?p=login&q=login&username=admin&pwd=admin&jumpto=URI&key=number=102&outgoing_uri=102@10.2.1.43

the outgoing uri, do you use the syntax account@server, please check again.

also, when you input the syntax into the broswer, it need you username/password, but when you input the syntax for the sceond time, will it need you input the username/password? Please let me know.

BR
Kevin


RE: Remote dialing V80 firmware - Kevin_Yealink - 10-11-2016 05:02 PM

(10-11-2016 04:51 PM)Yealink_kevin Wrote:  
(10-06-2016 10:22 PM)edrobal Wrote:  Hello
We use telify for firefox for remote dialing. With old V73 firmware this function without problem but after upgrading to V80 firefox ask for username/password after clicking on tel number.
The syntax used by telify is :
http://[phone ip]/servlet?p=login&q=login&username=[username]&pwd=[password]&jumpto=URI&key=number=[number]&outgoing_uri=[account]

Is there a problem in V80 or a change to syntax?

Thanks

Hi

This is Kevin from Yealink support team, nice to know you.

For the issue, so when you enter the syntax, it still need you input the password? right?
 http://10.2.10.13/servlet?p=login&q=login&username=admin&pwd=admin&jumpto=URI&key=number=102&outgoing_uri=102@10.2.1.43

the outgoing uri, do you use the syntax account@server, please check again.

also, when you input the syntax into the broswer, it need you username/password, but when you input the syntax for the sceond time, will it need you input the username/password? Please let me know.

BR
Kevin

Hi

I test in my side with syntax and it can work, please use the syntax to test again.
http://admin:admin@10.2.10.75/servlet?key=number=101&outgoing_uri=105@10.2.1.48

Let me know if any update.
BR
Kevin


RE: Remote dialing V80 firmware - edrobal - 10-11-2016 06:00 PM

(10-11-2016 05:02 PM)Yealink_kevin Wrote:  Hi

I test in my side with syntax and it can work, please use the syntax to test again.
http://admin:admin@10.2.10.75/servlet?key=number=101&outgoing_uri=105@10.2.1.48

Let me know if any update.
BR
Kevin

Thank you this syntax is good. No more problem.

Regards