+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T48G Call History / Placed Calls (/showthread.php?tid=2861)
T48G Call History / Placed Calls - donguanella - 11-25-2014 04:56 AM
When viewing "History" and then "Placed" calls, my call log shows only my outbound caller ID and not the number dialed.
You have to tap the "info" icon in order to see the number that was actually dialed.
Is there anyway to update the settings on the phone to show the actual number dialed in the "Placed" calls History?
Thanks!
RE: T48G Call History / Placed Calls - Yealink_Jim - 11-25-2014 04:28 PM
Hi，
You can set up as below picture:
Login to the web UI, go to Features-> General Information-> Call List Show Number, set up as Enabled
RE: T48G Call History / Placed Calls - donguanella - 11-26-2014 02:44 AM
I tried to find this setting, but it is not present on my T48G. Screen grabs attached. I'm running Firmware Version: 35.72.0.30 and Hardware Version 35.0.0.0.0.0.0.
[attachment=1190][attachment=1191]
RE: T48G Call History / Placed Calls - Yealink_Jim - 11-26-2014 09:01 AM
Hi,
Please go to below link to get the V73 beta bersion.
http://forum.yealink.com/forum/announcements.php?aid=8
RE: T48G Call History / Placed Calls - LeeDraper - 12-01-2015 05:32 PM
I know this is a bit late.
I had the same issue but the other way round. I wanted the name to appear not the number.
Even though the option to 'Call List Show Number' is missing from the web gui. I was able to set the option via the auto provisioning template y000000000035.cfg. The setting is:
features.call_log_show_num = 0
But I believe this should also work:
features.records_show_num = 0
Thanks
Lee