+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: Dect Phone Series (/forumdisplay.php?fid=6)
+--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23)
+--- Thread: W52P - Forward Off Code (/showthread.php?tid=2809)
W52P - Forward Off Code - mkeuter - 11-19-2014 07:55 PM
Hi,
the Yealink W52P with FW 25.73.0.25 sends the the Forward-off-code (*73) plus the target, in my case *73123, when turning off Call forward. All other Yealink phones I know are sending only *73. Is this a firmware bug?
Update: The related provisioning settings are:
Code:
account.1.always_fwd.on_code = *72
account.1.always_fwd.off_code = *73RE: W52P - Forward Off Code - industriecontact - 11-19-2014 08:12 PM
I can confirm this.
The W52P sends *73+target# while e.g. the T38G only sends *73 (the latter is the correct behavior, I guess ..).
Regards,
Andreas
RE: W52P - Forward Off Code - Coco_Yealink - 11-21-2014 08:34 PM
Hello ,
I can reproduce it in my side.
And I will consult with our engineers about this quetion.
Thx
RE: W52P - Forward Off Code - Coco_Yealink - 12-04-2014 01:51 PM
Hello ,
Could you please tell me what is the infuence on you if the W52P sends *73+target when turning off Call forward ? As I have got the reply from our engineers, actually the W52P is designed that way.
Thx
RE: W52P - Forward Off Code - mkeuter - 12-06-2014 06:43 AM
(12-04-2014 01:51 PM)Yealink_Coco Wrote: Hello ,
Could you please tell me what is the infuence on you if the W52P sends *73+target when turning off Call forward ? As I have got the reply from our engineers, actually the W52P is designed that way.
Thx
I have to reprogram our PBX and make an exception, as all other Yealink phones send only *73.
It's your choice, how you design your phones, but why don't you design all Yealink phones to behave similar in this point, very strange?
RE: W52P - Forward Off Code - Coco_Yealink - 12-08-2014 08:54 AM
OK , I got you .
I will feedback this problem to our product department. And they will evaluate whether to add to our next major version.
Thx
RE: W52P - Forward Off Code - jeremie - 03-11-2015 10:17 PM
(12-08-2014 08:54 AM)Yealink_Coco Wrote: OK , I got you .what about the correction of this bug ?
I will feedback this problem to our product department. And they will evaluate whether to add to our next major version.
Thx
it's the same with firmware 25.73.0.27
thanks for reply