+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: Call Waiting Tone (/showthread.php?tid=2805)
Call Waiting Tone - loganjessopconversant - 11-19-2014 07:43 AM
Hi there,
Using a T26, is it possible to have call waiting enabled but have no tone play when the second call comes in??
Thanks,
Logan
RE: Call Waiting Tone - CWR - 11-19-2014 08:06 AM
I have not tested this, but I would assume it is here:
Feature Tab
Audio section
"Call Waiting Tone"
RE: Call Waiting Tone - Coco_Yealink - 11-19-2014 05:17 PM
Hello ,
You can disable the Waiting tone via web interface:
Or you can also provision a batch of phones via auto provision.
The syntax of this function is :
call_waiting.tone = 0
Description:
It enables or disables the IP phone to play the call waiting tone when the IP phone receives an incoming call during a call.
0-Disabled
1-Enabled
You can refer to Auto_Provisioning_Guidethe for the details .
Thx