T20P transfer using Direct-IP calling - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +---- Forum: T2xP Series (/forumdisplay.php?fid=21) +---- Thread: T20P transfer using Direct-IP calling (/showthread.php?tid=2779) |
T20P transfer using Direct-IP calling - fwpost - 11-15-2014 10:41 PM Hello, We have three T20P's setup with direct-IP calling, without a central server. We try to transfer an incoming call from one phone to another, but the call stays on HOLD forever. In a previous thread, which has since been deleted, Yealink_Coco told me this was because of Direct-IP calling. Will there be a firmware update to fix this issue, or is there an alternative method of transferring an active call? Thank you very much RE: T20P transfer using Direct-IP calling - James_Yealink - 11-18-2014 03:42 PM Hi Fwpost, Currenlty it's not supported in Phone. You need a pbx server to handle the transfer. Regards, James |