+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: How to adjust time between ring tones (/showthread.php?tid=276)
How to adjust time between ring tones - eauxnguyen - 03-07-2013 01:17 AM
Using the United States Ring2.wav the ring tones. The handset rings less than 1 second between tones. So the caller hears 3 rings and the handset rings at least 6 times. How can I increase the time between rings?
I've tried adjusting ring cadence in indications.conf with no change. I see on the Yealink config Phones\Tones I can set it to custom but I don't see a setting incoming ring. Thanks - Owen
RE: How to adjust time between ring tones - Yealink Support - 03-18-2013 10:45 AM
Hello,
We don't have such configuration to adjust the interval between rings.
But you can make a custom ringtone by yourself, and upload it to your phone.
About how to make ringtone, you can download the manual from our website:
http://www.yealink.com/Upload/document/HowtoMakeRingtoneforYealinkPhones/HowtoMakeRingtoneforYealinkSIPT2XPPhonesRev_610-20445531581.pdf