Second dial tone and dial from phonebook by handset off-hook - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Wishlist (/forumdisplay.php?fid=13) +--- Thread: Second dial tone and dial from phonebook by handset off-hook (/showthread.php?tid=275) |
Second dial tone and dial from phonebook by handset off-hook - xmichald - 03-06-2013 08:04 AM Hello, I have 2 proposals for T-2xP phone product line: 1) To implement possibility to configure and use second dialtone ("outside dialtone"). The additional requirement for this is to have possibility to define different pattern which differs from normal dialtone. Purpose: in some countries subscribers are used to get different dialtone after dialing 0 or 9 digit to access "outside CO line" in traditional PBX environment. 2) To implement possibility to dial numbers from phonebook/history by handset hook-off only. Proposed behaviour: some record is focused in history/phonebook, subscriber makes hook-off, number should be dialed (without need to press Dial function key). Current behaviour: after lifting handset phone waits for dialing different number manually - number line is blank. Some Voip phones/gateways have both these functionalities and this behaviour would be very nice - improvement of functionality (1) and ergonomy (2). Best regards, Michael |