+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: Auto-Provisioning not updating/replacing settings. (/showthread.php?tid=2698)
Pages: 1 2
RE: Auto-Provisioning not updating/replacing settings. - lorn10 - 11-24-2014 02:28 AM
Just for information, - I figured it out! (After hours of testing..)
The new provision file is now 100% M7 template compatible. It seems that some parameters in the previous provision file where outdated and incompatible. These legacy parameter probably cause errors with firmware newer then v70+.
Note, this T32G & T38G config here is designed for Europe, - it has 24 clock & date format and (Central) European daylight saving parameters.
Update 13.05.2015
--> actual T3xG template for OSS End Point Manager at FreePBX
Code:
#!version:1.0.0.1
## the file header "#!version:1.0.0.1" can not be edited or deleted. ##
#
local_time.time_zone = {$timezone}
local_time.time_zone_name =
local_time.ntp_server1 = {$network_time_server}
local_time.ntp_server2 = pool.ntp.org
local_time.interval = 1000
local_time.summer_time = 1
local_time.dst_time_type = 1
local_time.start_time = 3/5/7/1
local_time.end_time = 10/5/7/2
local_time.offset_time = 60
local_time.time_format = 1
local_time.date_format = 5
local_time.dhcp_time = 0
local_time.manual_time_enable = 1
#
auto_provision.mode = 1
auto_provision.repeat.enable = 0
auto_provision.repeat.minutes = 1440
auto_provision.weekly.enable = 0
auto_provision.weekly.mask = 0123456
auto_provision.weekly.begin_time = 00:00
auto_provision.weekly.end_time = 00:00
auto_provision.server.url = tftp://{$server.ip.1}
auto_provision.dhcp_option.enable = 1
#
telnet.enable = 0
#
voice.cng = 0
voice.vad = 1
voice.side_tone = -30
voice.tone.country = {$tones_country}
#
distinctive_ring_tones.alert_info.1.text = interal
distinctive_ring_tones.alert_info.1.ringer = 2
distinctive_ring_tones.alert_info.2.text = external
distinctive_ring_tones.alert_info.2.ringer = 5
#
phone_setting.inter_digit_time = 4
phone_setting.flash_hook_timer = 1
phone_setting.lock = 0
phone_setting.phone_lock.unlock_pin = 10
phone_setting.phone_lock.lock_time_out = 10
phone_setting.ring_type = Busy.wav
phone_setting.active_backlight_level = 6
phone_setting.inactive_backlight_level = 0
phone_setting.backlight_time = 120
phone_setting.ring_for_tranfailed = Ring1.wav
phone_setting.logon_wizard = 0
phone_setting.predial_autodial = 0
phone_setting.is_deal180 = 1
phone_setting.dialnow_delay = {$dialnowdelay}
phone_setting.custom_softkey_enable = 0
phone_setting.theme = {$theme}
phone_setting.emergency.number = 000
phone_setting.sms_popup_enable = 1
phone_setting.common_power_led_enable = 0
phone_setting.mail_power_led_flash_enable = 0
phone_setting.mute_power_led_flash_enable = 0
phone_setting.hold_power_led_flash_enable = 0
phone_setting.voice_volume = 5
#
dialplan_dialnow.url = tftp://{$server.ip.1}/dialnow.xml
#
security.user_password = admin:{$adminpw}
#
firmware.url = {$firmware_name}