DNS NAPTR not requested - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Configuration (/forumdisplay.php?fid=24) +--- Thread: DNS NAPTR not requested (/showthread.php?tid=2619) |
DNS NAPTR not requested - ldardini - 10-23-2014 03:47 PM Hello, I tried to configure my T28P with 2.72.0.80 to use DNS NAPTR for resolving the server name. In the Account section I have set Transport to DNS NAPTR, but the phone continues to query for DNS A records. There is no A record for the hostname I set as server. RE: DNS NAPTR not requested - James_Yealink - 10-23-2014 06:46 PM Hi Idardini, Please set the port to 0 and check again. If a port is set to 0 and the transport type is set to DNS-NAPTR, NAPTR and SRV queries will be tried before falling back to A query. If no port is found through the DNS query, 5060 will be used. If an explicit port (except 0) is specified and the transport type is set to DNS-NAPTR, the only lookup will be an A query. Regards, James |