Yealink Forums
Add a 0 - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: Add a 0 (/showthread.php?tid=2519)



Add a 0 - ginopilotino - 10-08-2014 12:55 AM

Is there a way to automatically add a 0 to a number longer more then 3 digits?

Solved, it's in "area code"

Now the prob is that if a recall a number I get one more 0, than 00, 000 and so on.


RE: Add a 0 - CWR - 10-08-2014 07:54 AM

(10-08-2014 12:55 AM)ginopilotino Wrote:  Is there a way to automatically add a 0 to a number longer more then 3 digits?

Solved, it's in "area code"

Now the prob is that if a recall a number I get one more 0, than 00, 000 and so on.

The area code plan on the T4x series allow minimum and maximum digits.
So, If 3 digits minimum and 3 maximum, add a 0 as area code.

I don't think the replace rule can do it here. I assume you are using this without a PBX.

I


RE: Add a 0 - ginopilotino - 10-08-2014 03:40 PM

Good idea, I solved reconfiguring my pbx Wink