+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: reboot phone disconnects PC port (/showthread.php?tid=2493)
reboot phone disconnects PC port - bsanders - 09-29-2014 10:27 PM
Good Day,
Using Yealink T42/T46/T48 (with PoE) and I assume it happens to other Yealink models. When you reboot the phone the PC port disconnects until the phone has "booted". Polycoms I have tested do NOT do this.
Is this a hardware or software limitation of the Yealink phone? Are there any solutions or plans to prevent this in future models/firmware?
thanks.
I guess I should have looked through the forum a bit further. Apparently not the first time this was brought up:
http://forum.yealink.com/forum/showthread.php?tid=2068
Support - Please let us know if anything has changed in the roadmap to fix this.
RE: reboot phone disconnects PC port - James_Yealink - 10-11-2014 05:37 PM
Hi Bsanders,
Yes currently the PC port disconnects when phone reboot.
We will submit the feature request to our Product department for a evaluation
Thanks
James
RE: reboot phone disconnects PC port - complex1 - 10-11-2014 07:39 PM
Hi,
FYI: Also Snom and Grandstream phones disconnect their PC port when rebooting.
Yealink is not the only one on this.
Regards.
RE: reboot phone disconnects PC port - bsanders - 10-14-2014 09:13 PM
Thanks for the replies. Is this hardware or software related (or both)?