yealink sip-t26p AutoProvision every 10 mins - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Auto Provisioning (/forumdisplay.php?fid=14) +--- Thread: yealink sip-t26p AutoProvision every 10 mins (/showthread.php?tid=2463) |
yealink sip-t26p AutoProvision every 10 mins - tommy - 09-24-2014 06:11 AM yealink sip-t26p AutoProvision every 10 mins. I try Firmware 6.72.0.75,6.72.0.50 and 6.72.0.80, phone still provision every 10mins. Sep 23 21:18:51 AUTP[344]: AUTP<6+info > RepeatPolicy:Post thread Msg(0x000A0000, 0, 0) Sep 23 21:18:51 AUTP[344]: AUTP<6+info > AutoProvision Begin >>> Sep 23 21:18:51 AUTP[344]: AUTP<6+info > Check Talklogic Status ... Sep 23 21:18:51 AUTP[344]: AUTP<6+info > Send Msg 0x30007 to app_vpPhone Sep 23 21:18:51 AUTP[344]: AUTP<6+info > *** [TASK:344] Lanuch Msg[XA0000] Sep 23 21:18:51 AUTP[344]: AUTP<6+info > Receive start AutoP Sep 23 21:18:51 AUTP[344]: AUTP<6+info > *** Launch Upgrade Sep 23 21:18:51 AUTP[344]: AUTP<6+info > *** Launch DHCP Upgrade Sep 23 21:18:51 AUTP[344]: AUTP<6+info > *** Launch Config URL Upgrade Sep 23 21:18:51 AUTP[344]: AUTP<6+info > network complete Sep 23 21:18:51 AUTP[344]: AUTP<4+warnin> Get device mac: [t26 mac] Sep 23 21:18:51 AUTP[344]: AUTP<4+warnin> Get device mac: [t26 mac] Sep 23 21:18:51 AUTP[344]: AUTP<6+info > type = http,hostname = myprovisionserver, username = , psw = ******, port = -1 Sep 23 21:18:52 AUTP[344]: AUTP<6+info > download file success!! Sep 23 21:18:52 AUTP[344]: AUTP<6+info > Load M7 Sep 23 21:18:52 AUTP[344]: AUTP<4+warnin> Get device mac: [t26 mac] Sep 23 21:18:52 AUTP[344]: AUTP<6+info > MD5 is same! Upgrade [bin|rom] Sep 23 21:18:52 AUTP[344]: AUTP<6+info > *** Upgrade BIN File Sep 23 21:18:52 AUTP[344]: AUTP<6+info > NAME: [ remote_phonebook.data.1.name ] Sep 23 21:18:52 AUTP[344]: AUTP<6+info > Bin MD5 is same Sep 23 21:18:52 AUTP[344]: AUTP<6+info > *** END [NO CHANGE] Sep 23 21:18:52 AUTP[344]: AUTP<6+info > Update Parse file Finished! Sep 23 21:18:52 AUTP[344]: AUTP<6+info > Upgrade finished [OK] Sep 23 21:18:52 AUTP[344]: AUTP<6+info > Send Upgrade end to GUI! Sep 23 21:18:52 AUTP[344]: AUTP<6+info > Broad msg reboot = FALSE Sep 23 21:18:52 AUTP[344]: AUTP<6+info > Autop Success, Close Redirect! Sep 23 21:18:52 AUTP[344]: AUTP<6+info > Autoprovision End >>> Sep 23 21:28:51 AUTP[344]: AUTP<6+info > RepeatPolicy:Post thread Msg(0x000A0000, 0, 0) Sep 23 21:28:51 AUTP[344]: AUTP<6+info > AutoProvision Begin >>> Sep 23 21:28:51 AUTP[344]: AUTP<6+info > Check Talklogic Status ... Sep 23 21:28:51 AUTP[344]: AUTP<6+info > Send Msg 0x30007 to app_vpPhone Sep 23 21:28:51 AUTP[344]: AUTP<6+info > *** [TASK:344] Lanuch Msg[XA0000] Sep 23 21:28:51 AUTP[344]: AUTP<6+info > Receive start AutoP Sep 23 21:28:51 AUTP[344]: AUTP<6+info > *** Launch Upgrade Sep 23 21:28:51 AUTP[344]: AUTP<6+info > *** Launch DHCP Upgrade Sep 23 21:28:51 AUTP[344]: AUTP<6+info > *** Launch Config URL Upgrade Sep 23 21:28:51 AUTP[344]: AUTP<6+info > network complete Sep 23 21:28:51 AUTP[344]: AUTP<4+warnin> Get device mac: [t26 mac] Sep 23 21:28:51 AUTP[344]: AUTP<4+warnin> Get device mac: [t26 mac] Sep 23 21:28:51 AUTP[344]: AUTP<6+info > type = http,hostname = myprovisionserver, username = , psw = ******, port = -1 Sep 23 21:28:52 AUTP[344]: AUTP<6+info > download file success!! Sep 23 21:28:52 AUTP[344]: AUTP<6+info > Load M7 Sep 23 21:28:52 AUTP[344]: AUTP<4+warnin> Get device mac: [t26 mac] Sep 23 21:28:52 AUTP[344]: AUTP<6+info > MD5 is same! Upgrade [bin|rom] Sep 23 21:28:52 AUTP[344]: AUTP<6+info > *** Upgrade BIN File Sep 23 21:28:52 AUTP[344]: AUTP<6+info > NAME: [ remote_phonebook.data.1.name ] Sep 23 21:28:52 AUTP[344]: AUTP<6+info > Bin MD5 is same Sep 23 21:28:52 AUTP[344]: AUTP<6+info > *** END [NO CHANGE] Sep 23 21:28:52 AUTP[344]: AUTP<6+info > Update Parse file Finished! Sep 23 21:28:52 AUTP[344]: AUTP<6+info > Upgrade finished [OK] Sep 23 21:28:52 AUTP[344]: AUTP<6+info > Send Upgrade end to GUI! Sep 23 21:28:52 AUTP[344]: AUTP<6+info > Broad msg reboot = FALSE Sep 23 21:28:52 AUTP[344]: AUTP<6+info > Autop Success, Close Redirect! Sep 23 21:28:52 AUTP[344]: AUTP<6+info > Autoprovision End >>> RE: yealink sip-t26p AutoProvision every 10 mins - James_Yealink - 09-24-2014 09:42 AM Hi Tommy, Please login phone web interface, go to Setting-> Autoprovision, have you enabled "Repeatedly" option and set the interval to 10 minutes? If not, go to Setting-> Configuration, export phone configuration to us. Regards, james RE: yealink sip-t26p AutoProvision every 10 mins - dunhill - 11-20-2014 06:05 AM Change the auto prov setting with the config file. This default is a real pain as the phone also loses registration every 10 minutes as well. Still a bonus feature in V73. |