+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: FAQs etc (/forumdisplay.php?fid=38)
+--- Forum: FAQs (/forumdisplay.php?fid=39)
+--- Thread: T26P Green Lights not working (/showthread.php?tid=2429)
T26P Green Lights not working - jacobburridge - 09-19-2014 01:37 AM
I did a firmware upgrade (6.72.0.75) on my T26P phone. Prior to the upgrade when I parked a call the side button would turn red when the call was parked and green when the call was picked up on my phone. After the upgrade the button only shows red when the call is parked, but does not show a green light when the call is answered. (There is a green light however on the Line 1 key) But I want there to be the green light on the Memory DSSKEY. Please advise how I can make the green light show again.
RE: T26P Green Lights not working - Yealink_Jim - 09-19-2014 07:39 PM
Hi,
You can set up as below steps:
1.Login the web UI, go to Features->General Information-> BLF LED Mode and set with "2"
2.Login the web UI, go to DSSKey->Memory Key
Hope this helps!