+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: Not updating config after factory reset (/showthread.php?tid=2391)
Not updating config after factory reset - bart2puck - 09-11-2014 08:57 PM
I have a T38 that has a config on it and it works fine. If i factory reset the device and put in the auto-provisioning server information, i see the phone download the config, but it does not update the config, so the phone is stuck with "no service"
Sep 11 12:43:54 199.119.132.250 autop[425]: [./src/fileStream.cpp :937 ] IFO OpenDownloadStream[server.com][/XXXXXXXXXXX.cfg]
Sep 11 12:43:54 199.119.132.250 autop[425]: [./src/fileStream.cpp :985 ] IFO getaddrinfo [server.com]
Sep 11 12:43:55 199.119.132.250 autop[425]: [./src/fileStream.cpp :1643] IFO ExcuteCommandE [SIZE XXXXXXXXXXX.cfg], ret = 213 90650#015
Sep 11 12:43:55 199.119.132.250 autop[425]: [./src/fileStream.cpp :1650] IFO ExcuteCommandE [PASV], ret = 227 Entering Passive Mode (199,119,132,171,226,240).#015
Sep 11 12:43:55 199.119.132.250 autop[425]: [./src/fileStream.cpp :1052] IFO Open URL OK
Sep 11 12:43:55 199.119.132.250 autop[425]: [./src/autoParser.cpp :1331] IFO Load M7
Sep 11 12:43:56 199.119.132.250 autop[425]: [./src/autoParser.cpp :937 ] IFO MD5 is same! Upgrade [bin|rom]
it seems to remember its old config, but doesnt load it into memory.
any thoughts?
RE: Not updating config after factory reset - James_Yealink - 09-13-2014 01:28 PM
Hi Bart2puck,
Please try changing some parameter in the autoprovision file and check again.
Phone won't go to apply a same configuration file which is same to the last one it use.
Regards,
James
RE: Not updating config after factory reset - bart2puck - 09-23-2014 11:23 PM
should a factory reset wipe out any memory of what it had?
RE: Not updating config after factory reset - James_Yealink - 09-24-2014 10:13 AM
Yes, facotry reset will wipe out any memory.
If it still doesn't work can you send me your configuration file through PM?
You can delete the password information in the configuration file, I just check the format of it.