T22 and firmware upgrade - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +---- Forum: T2xP Series (/forumdisplay.php?fid=21) +---- Thread: T22 and firmware upgrade (/showthread.php?tid=239) |
T22 and firmware upgrade - saleh - 02-16-2013 01:08 AM Hello, I have T22 IP Phone not T22P, what is the latest firmware available for the T22, can I upgrade to 7.70.0.130 and how. Below is the current firmware/hardware version of my T22 IP Phone Firmware Version 7.51.0.10 Hardware Version 5.0.0.53 Thanks... Best Regards, Saleh RE: T22 and firmware upgrade - Mauro - 02-19-2013 04:59 PM I don't know if it possible to pass directly from a .5x firmware to a .7x. I suppose you may pass from .5x to a .6x first, then to a .7x if you want to be sure. But maybe it is possible to pass for 5 to 7... I don't know. You may check v70 documentation to see if it says something about it. http://www.yealink.com/SupportDownloadfiles_detail.aspx?ProductsID=63&CateID=186&flag=142 V70 makes big changes in autoprovisioning format... You can find various documentation for infos about it at the above link. RE: T22 and firmware upgrade - justingoldberg - 08-16-2019 01:15 PM (02-19-2013 04:59 PM)Mauro Wrote: I don't know if it possible to pass directly from a .5x firmware to a .7x. I suppose you may pass from .5x to a .6x first, then to a .7x if you want to be sure. But maybe it is possible to pass for 5 to 7... I don't know. Interesting, I have a T22p stuck on 7.60.40.7, and they will not use any firmware on the official update page, even in tftp recovery mode: http://support.yealink.com/documentFront/forwardToDocumentDetailPage?documentId=21 Edit: It turns out I was updating the firmware wrong. It must be named t22.rom in your tftp root folder. |