Yealink Forums
FTP Autoprovisioing not getting cfg files - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: FTP Autoprovisioing not getting cfg files (/showthread.php?tid=2371)



FTP Autoprovisioing not getting cfg files - CraigFox - 09-08-2014 09:43 PM

I have moved to a FTP solution for auto-provisioning the phones to add authentication to the provisioning process. My test phone is a T38G. This phone auto provisioned fine using tftp. I copies the two files (y000000000038.cfg and MAC.cfg) to the ftp server.

I can see the phone connect (with authentication) to the ftp server but no request for the CFG files. Are there any special requirements to using FTP? Permissions? or Format Changes?


RE: FTP Autoprovisioing not getting cfg files - James_Yealink - 09-10-2014 06:23 PM

Hi CraigFox,

No, there is no a special requirements to using FTP server.
Please make sure that the URL is filled correctly and there is no limitation on your FTP server.

James


RE: FTP Autoprovisioing not getting cfg files - yealink - 09-16-2015 08:04 PM

Are by you utilizing passive FTP?