+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: Video Collaboration (/forumdisplay.php?fid=5)
+--- Forum: VP530 (/forumdisplay.php?fid=25)
+--- Thread: Camera Vp 530 (/showthread.php?tid=2320)
Camera Vp 530 - Mggt - 08-27-2014 03:17 PM
Hi,
Could you please help me. I’ve a couple of questions about Yealink vp530.
1) There’s a camera switch off button, is it possible to switch off camera in hold state?
2) If no, how can i change display switch off timer from 1 minute to 8 seconds, for example?
Thank you.
RE: Camera Vp 530 - Wilson_Yealink - 09-01-2014 04:58 PM
The camera will be switched off when the call in hold state in factory default.
If your phone doesn't perform like this, please reset the phone to factory firstly and try again.
Access to menu->Advanced->Reset&Reboot.
RE: Camera Vp 530 - Mggt - 09-03-2014 06:12 PM
No. Reset to factory does not solve my problem.
Switch the camera in standby mode does not work.
Yes, while talking to them, you can turn off the camera
and requires that the user himself has not seen. (Turn the camera by hand, no matter how solid).
RE: Camera Vp 530 - Wilson_Yealink - 09-04-2014 03:03 PM
Hi Mggt,
When you are talking with others, you press the hold. The both side video will be closed. Like attached picture.
RE: Camera Vp 530 - Lolitalala - 06-15-2015 09:03 PM
Try to press the hold one more time, it's maybe error in the software installed