+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: iLBC codec (/showthread.php?tid=231)
iLBC codec - Bryan Nelson - 02-14-2013 04:27 AM
I am having difficulty provisioning a phone (t-2x series) to use the iLBC codec. I see that it is supported by these phones, but I cannot get it to enable, or even show in the list of codecs available in the web interface.
I have set the following in the account settings:
[ audio6 ]
enable = 1
PayloadType = iLBC
priority = 0
rtpmap = 102
as well as ilbc_enable = 1 in the advanced settings area.
I'm assuming I'm missing something simple?
RE: iLBC codec - compsos - 02-16-2013 07:06 AM
We have seen the same problem. In the tftp configuration file it list the iLBC codec but the phone's website does not. Is this codec available to these phone and what do we have to do to activate it? TIA
RE: iLBC codec - Bryan Nelson - 02-16-2013 07:15 AM
(02-16-2013 07:06 AM)compsos Wrote: We have seen the same problem. In the tftp configuration file it list the iLBC codec but the phone's website does not. Is this codec available to these phone and what do we have to do to activate it? TIA
From what I can find, documentation released by Yealink states support for the ilbc codec.
http://www.microdata.fi/pdf/Yealink/Yealink_vs_Snom.pdf
And this lists it as "optional", I'm assuming because it must be enabled via provisioning?
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=11&ved=0CDkQFjAAOAo&url=http%3A%2F%2Fwww.poisetechnology.com%2Fdetail%2520web%2FSupport_Brands%2F%255BYealink%255D%2FIP%2520Phone%2FDatasheet%2FComparison%2FYealink_vs_Cisco.pdf&ei=C8EeUbLaA8jcyQGxioCwDQ&usg=AFQjCNE8rPKZEtrOG37CxuJxOOh5SkAYNQ
RE: iLBC codec - deepanvi - 02-22-2013 05:49 PM
The internet Low Bitrate Codec (iLBC) is a standard, high-complexity speech codec that is suitable for robust voice communication over IP.