+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: Dect Phone Series (/forumdisplay.php?fid=6)
+--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23)
+--- Thread: Searching for bases (/showthread.php?tid=2255)
Searching for bases - c.ponce - 08-15-2014 10:01 PM
Dear.
We bought a month ago , 4 units W52P with 12 hanset, at the beguin had to much troubles with our lan , then decided separated to a different lan , but we have the same problem , the hanset shows the next message occasionally "Searching for base" , each W52P is conect to a UPS thereby never turn off . then hanset is 20 mtrs max of the bases , is not possible that the signal is lost in this distance , because your datasheet says : in indoor maximun 50 mtrs , outdoors 300 mtrs.
We have seven Acces point , working in different channels, keeping 2 channels of distance
among themselves, also we have four ip cameras working in the channel 3 .
will these devices are interfering with the bases?
Regards.
RE: Searching for bases - anonymous1675184009882 - 08-29-2014 05:34 PM
Hello c.ponce,
I have stated a data as below, you can refer to your local environment.
In a 20 square meter room, the maximum base you can place is 2.
And in a room, the best distance between base and base is 1.5m. It's not suggested that you place too much bases in a not big room.
Hope this can help you.
