+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: T20P Caller ID when using IP Call (/showthread.php?tid=2248)
T20P Caller ID when using IP Call - rademedes - 08-13-2014 11:39 PM
Hello,
There are two phones on the network with the following IP's:
192.168.1.1
192.168.1.2
When I call 192.168.1.1 from 192.168.1.2 caller ID shows: 192.168.1.2 on both lines. Shouldn't I see whatever I put in "Display Name" from Web>Account Page?
I was testing different options for "Caller ID Source" under Account>Advanced but the only thing I see is IP address.
Thanks
RE: T20P Caller ID when using IP Call - Elaine_Yealink - 09-01-2014 04:17 PM
Dear,
When using IP call, the source and destination will both be IP address and not go through any account. So the "display name" will not appear in " Caller ID Source".