+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: Possible NOT to turn backlight on on XML message (/showthread.php?tid=2246)
Possible NOT to turn backlight on on XML message - GeorgSchwarz - 08-13-2014 11:20 PM
Hi!
We intend to send status messgaes to our phones - mainly T26/T28s
Works like a charm.
Sometimes our software makes a "fail-safe" update just to make sure the settings are still on the display.
Is there a way to tell the phone that it should NOT turn on the Backlight in this case?
I've read through Yealink_SIP-T4X_IP_Phones_XML_Browser_Developer's_Guide_V71_150.pdf
and found no option.
Maybe this can be achieved using some other setting?
Best,
George
RE: Possible NOT to turn backlight on on XML message - MRS - 11-19-2015 11:44 PM
We have the same problem by using the new firmware 28.80.0.70 (Yealink SIP-T46G) and 29.80.0.70 (Yealink SIP-T42G). We want to change the configuration and execute functions via push xml, but the backlight should not be turned on.
Is there any configuration possible, if the phone receives a push xml message the backlight should not be turned on.