Yealink Forums
Multicast Page Button for Programmable Softkey - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Wishlist (/forumdisplay.php?fid=13)
+--- Thread: Multicast Page Button for Programmable Softkey (/showthread.php?tid=2241)



Multicast Page Button for Programmable Softkey - Cloud9phone - 08-13-2014 04:17 AM

It would be a great feature to add the ability to make one of the programmable softkeys (under the display) have the ability to be used for multicast paging.

Using T41P, T42G and T46G phones, 29.72.0.45 firmware now.

Key.Label = Page
Key.Type = 24
Key.Value = 224.0.01:10000 ( or any ip address & port )

We are trying to win a very large client who has been using polycom phones up to this point and this is a very important feature that the polycom phones have that Yealink do not.


RE: Multicast Page Button for Programmable Softkey - Yealink Support - 08-14-2014 04:52 PM

Dears,

Thanks for your continuously support for Yealink products.
Yealink IP phones did support multicast paging feature. we can configure this on softkeys,line keys and DSSkeys. Detail configuration are listed on our user guide. For T48G, please refer to page135-138:
http://www.yealink.com/Upload/manual/m/T4/Yealink_SIP-T48G_User_Guide_V72_2.pdf


RE: Multicast Page Button for Programmable Softkey - Cloud9phone - 08-14-2014 08:31 PM

(08-14-2014 04:52 PM)Yealink Support Wrote:  Dears,

Thanks for your continuously support for Yealink products.
Yealink IP phones did support multicast paging feature. we can configure this on softkeys,line keys and DSSkeys. Detail configuration are listed on our user guide. For T48G, please refer to page135-138:
http://www.yealink.com/Upload/manual/m/T4/Yealink_SIP-T48G_User_Guide_V72_2.pdf

Can you post sample code to make change to programmable soft key for T41P and T42G, T46G. We want to replace the Directory Key with a Multicast Key with Multicast address 224.0.0.1:10000 and Label = PAGE.

I can not see where to change this via ## Config Template.

Thank you for your timely reply.


RE: Multicast Page Button for Programmable Softkey - Cloud9phone - 08-17-2014 01:46 AM

I need to Config via template the T41P, T42G and T46G phone to have multicast page button on one of the four programmable soft keys under the display.

This is how Polycom does multicast page and we need to be able to provide this for a very large win over Polycom.

Can you provide custom firmware and template code to accomplish this important task?

Thank you.


RE: Multicast Page Button for Programmable Softkey - Lucas1 - 08-28-2014 07:21 PM

Big Grin nice to contact you.
Thanks for your continuously support for Yealink products.
Our phone don't support to set programmable softkeys (under the display) to be multicast paging.but line key can be set multicast paging.
I upload the txt file,you can modify the suffix to be cfg and try autop.
I would be same experience in using.