+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+--- Thread: W52P Battery Life (/showthread.php?tid=2156)
W52P Battery Life - namezero111111 - 07-29-2014 09:50 PM
Dear folks / Yealink,
I have recently purchased a Yealink base station and two W52P handsets.
Everything works very well, except that the handsets go from a full charge to only one red bar within an hour of being off the cradle.
They will still last for a while like that, but it seems that neither will hold a charge well; much less than what is advertised anyway.
The base station is running firmware version 25.50.0.20 adn the handsets 26.50.0.20.
I tried obtaining 26.30.0.40 as recommended here, but it's no longer available.
Any help would be appreciated!
RE: W52P Battery Life - Yealink Support - 08-19-2014 02:30 PM
Please upgrade firmware to V73 and try again.
handset firmware:26.73.0.10
base firmware:25.73.0.10
Any updates, please let me know.
thanks
RE: W52P Battery Life - namezero111111 - 08-20-2014 05:23 PM
Thanks for your reply.
I have tried the upgrade, but now when logging in to the web interface it says "Handset firmware upgrading. Please wait" even 24 hrs later.
I am not on site; is there any way to reset the base remotely?
RE: W52P Battery Life - Yealink Support - 08-25-2014 03:08 PM
Hi namezero111111,
Please try below steps:
1.You can clear the cache of the broswer and reflash that web GUI and try again.
2.If it still doesn't work and you can access to web GUI->phone->upgrade tab, please press the Reset now in the Reset to Factory.
3.After above steps still can't work and you are on site, please try hard reset. Please refer to this video. >>DECT_Reset<<
thanks