T46 distinctive ring issue - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: T46 distinctive ring issue (/showthread.php?tid=2138) |
T46 distinctive ring issue - isack.waserman@telcodepot.com - 07-25-2014 06:41 AM Hi, I have a strange issue. I have an Elastix 2.x pbx with both 15 T42 and a single T46 phones I have set on Elastix inbound rout alert info = out to distinguish incoming calls from internal calls. On the yealink phones I set 'out' in Settings->ring and selected ringtone 3 (for example). It works great on the T42 phones but not on the T46 T46 Firmware is: 28.72.0.2 Any Idea? Thanks RE: T46 distinctive ring issue - Yealink Support - 07-30-2014 08:37 PM HI , Could you please upgrade the firmware of T46 to the latest version and try again? You can get it from here.>>here<< thanks RE: T46 distinctive ring issue - isack.waserman@telcodepot.com - 07-31-2014 06:05 AM (07-30-2014 08:37 PM)Yealink Support Wrote: HI , Hi, I have upgraded the phone with this FW. The issue is still there. Thanks Isack RE: T46 distinctive ring issue - isack.waserman@telcodepot.com - 08-13-2014 03:14 AM (07-31-2014 06:05 AM)isack.waserman@telcodepot.com Wrote:(07-30-2014 08:37 PM)Yealink Support Wrote: HI , Hi, Thanks for the help issue is now resolved |