Yealink Forums
Change Order programmableKey - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Change Order programmableKey (/showthread.php?tid=21045)



Change Order programmableKey - Bit-Tween - 08-22-2016 02:49 PM

Hi,

i'want to change the order from programmable key with my template, but dosen't work:

Thanks for help

#programablekey.x.type--Customize the programmable key type.
#The valid types are:
#0-N/A 2-Forward 5-DND 6-Redial 7-Call Return 8-SMS 9-Direct Pickup 13-Spead Dial
#22-XML Group 23-Group Pickup 27-XML Browser 28-History 29-Directory 30-Menu 31-Switch Account 32-New SMS
#33-Status 40-PTT 43-Local Phonebook 44-Broadsoft Phonebook 45-Local Group 46-Broadsoft Group 47-XML Phonebook 50-Keypad Lock
#PTT-add a specified prefix number before the dialed number.
#programablekey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 5.

#programablekey.x.value =
#programablekey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the programmable key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group.
#programablekey.x.history_type =

#programablekey.x.label--This parameter is only available to the key 1 to key 4.

programablekey.1.type = 2
programablekey.1.line =
programablekey.1.value =
programablekey.1.history_type =
programablekey.1.label = déviation
programablekey.1.xml_phonebook =

programablekey.2.type = 47
programablekey.2.line = 0
programablekey.2.value =
programablekey.2.history_type =
programablekey.2.label = 3CX PBook
programablekey.2.xml_phonebook =

programablekey.3.type = 28
programablekey.3.line =
programablekey.3.value =
programablekey.3.history_type =
programablekey.3.label = Historique
programablekey.3.xml_phonebook =

programablekey.4.type = 30
programablekey.4.line =
programablekey.4.value =
programablekey.4.history_type =
programablekey.4.label = Menu


RE: Change Order programmableKey - Bit-Tween - 08-23-2016 02:24 PM

Any Idea? Thanks


RE: Change Order programmableKey - Lucia_Yealink - 09-19-2016 08:55 PM

(08-23-2016 02:24 PM)Bit-Tween Wrote:  Any Idea? Thanks

HI Sir,

Can you kindly tell me which one programablekey can't work?
Or all of them can't work? Please make sure that you add the parameter"#!version:1.0.0.1" in the auto provision file.
If the it still can't work, please send me the level 6 syslog,config.bin and pace trace when you make auto provision for me(Lucia@yealink.com) to make further check.
About how to get the three files, please refer to the FAQ below:
How to Get Correct Syslog, config.bin and trace