Ldap host parameter problem - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Auto Provisioning (/forumdisplay.php?fid=14) +--- Thread: Ldap host parameter problem (/showthread.php?tid=2098) |
Ldap host parameter problem - yeacpt - 07-19-2014 05:40 PM Hello, I am trying to do auto provisioning for the LDAP configuration. All the parameters (base, username, filter, ..) are correctly received only host stay empty! In the y000..0028.cfg file I have this for the host: ldap.host = 192.168.1.1 Is it a bug or did I misunderstand something? This on a T46G v28.72.0.1 Thanks RE: Ldap host parameter problem - Wilson_Yealink - 08-26-2014 05:09 PM Hi yeacpt, I have tested it with T46 in my side and the FM is 28.72.0.1, it does work well. So i think this sentence of auto provision is correct. Please upgrade your firmware to the latest version 28.72.0.45 and try again. You can get it from here. >>28.72.0.45<< After auto provision, please check the ldap host parameter whether take effect or not. Access to web GUI->Directory->LDAP->Server Address, you can see it. If it still doesn't work, please send me your y000..0028.cfg file, I will test it in my side to check your issue. thanks |