![]() |
Call Wating Tone - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: General topics (/forumdisplay.php?fid=15) +--- Thread: Call Wating Tone (/showthread.php?tid=209) |
Call Wating Tone - Voore - 01-30-2013 11:54 PM I have found on Yealink phones that when getting a beep and call waiting tone is enabled the caller on the other end will also noticed a call waiting tone, I tried lowering the tone and help the its not that loud but still hers a tone, is there any way to that caller shouldn't hear the beep tone at all? RE: Call Wating Tone - Yealink Support - 01-31-2013 11:11 AM (01-30-2013 11:54 PM)Niki Wrote: I have found on Yealink phones that when getting a beep and call waiting tone is enabled the caller on the other end will also noticed a call waiting tone, I tried lowering the tone and help the its not that loud but still hers a tone, is there any way to that caller shouldn't hear the beep tone at all? Hi Niki, Do you mean the scenario is like below , A is talking with B , another user C calls A, A will play out call waiting tone, then C can hear the call waiting tone as well. right? Could you please let me konw which firmware you use ? if not the latest firmware , please download the firmware from yealink web site. I have tested a T32 and T22, but can't reproduce this issue, could you please let me know if A use the handset or Speaker? Does A use the speaker?if so , the issue may happen, because the phone paly out the call waiting tone, then phone detect the tone it send it to C just like the user's voice. if you use the handset, the issue won't happen. Best Regards! Yealink Support Team. RE: Call Wating Tone - Voore - 01-31-2013 10:20 PM no, this is not the scenario, the scenario is as follows... A is talking to B, another user C calls A, A hears the call waiting tone and B will also hear it RE: Call Wating Tone - Yealink Support - 02-01-2013 05:13 PM (01-31-2013 10:20 PM)Niki Wrote: no, this is not the scenario, the scenario is as follows... Hi Niki, sorry I have made a mistake by mix teh B and C. so the really scenario is like below, A is talking with B , another user C calls A, A will play out call waiting tone, then B can hear the call waiting tone as well. right? Could you please let me konw which firmware you use ? if not the latest firmware , please download the firmware from yealink web site. I have tested a T32 and T22, but can't reproduce this issue, could you please let me know if A use the handset or Speaker? Does A use the speaker?if so , the issue may happen, because the phone paly out the call waiting tone, then phone detect the tone it send it to B just like the user's voice. if you use the handset, the issue won't happen. sorry for the inconvenience. Yealink Support Team |