3cx CTI url no work with t20 - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +--- Thread: 3cx CTI url no work with t20 (/showthread.php?tid=2074) |
3cx CTI url no work with t20 - bluetel - 07-16-2014 07:56 PM Hi we try to use CTi with yealink t20 but it's no work here the log Jul 16 11:23:58 syslog: Action URI: IP(192.168.1.137) Action(key=SPEAKER;9;9;9;ENTER) Jul 16 11:23:58 Log [319]: CUIT<6+info > CAccessManager::ProcessMsg:0x30017, lParam:0 Jul 16 11:23:58 Log [319]: CUIT<6+info > Allow to Remote Control ! Jul 16 11:23:58 Log [319]: URIL<6+info > ParseURI[key=SPEAKER;9;9;9;ENTER] Jul 16 11:23:58 Log [319]: URIL<4+warnin> not found cmd! nothing happend on phone here the config Sep 5 00:00:08 LLDP[317]: LLDP<6+info > HwVersion = 7, PlatForm = 0 Sep 5 00:00:08 LLDP[317]: LLDP<6+info > szHwVersion = 7.0.0.60, manufacturer = Yealink Sep 5 00:00:08 LLDP[317]: LLDP<6+info > ModelName = SIP-T20P, SystemName = YEALINK_SIP337_IPPHONE Sep 5 00:00:08 LLDP[317]: LLDP<6+info > Description = IP Phone, FirmwareVision = 9.71.0.224 tks advance for your help It only work if phone and computer are on the same network, but if phone is on 192.168.42.x and computer 192.168.1.x it's not work. compuer can ping phone, and phone receive speaker commande but no execute it. RE: 3cx CTI url no work with t20 - Yealink Support - 08-18-2014 10:45 AM Hi bluetel, 1.Please upgrade the firmware firstly and try again. You can get the firmawre from here.>>9.72.0.30<< 2.Please try Action URI in the broswer. You can refer to the guide. Page begin at 176. >>guide<< thanks |