T48G backlight BUG - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: T48G backlight BUG (/showthread.php?tid=20524) |
T48G backlight BUG - briankelly63 - 08-16-2016 09:55 AM 35.80.0.95 had no issue. Upgraded to 35.80.0.130 and then set backlight to 'Always On' but backlight goes off. Backlight Inactive Level: Low Backlight Active Level: 8 Backlight Time(seconds) Always On No combination of settings in 35.80.0.130 will keep backlight on. Reverting to 35.80.0.95 solves the problem. RE: T48G backlight BUG - ca_kwcs - 08-19-2016 12:17 AM (08-16-2016 09:55 AM)briankelly63 Wrote: 35.80.0.95 had no issue. Upgraded to 35.80.0.130 and then set backlight to 'Always On' but backlight goes off. I have the same issue with the same firmware but on T46 phones. RE: T48G backlight BUG - briankelly63 - 08-19-2016 09:53 PM It's very annoying when they break things on a new firmware release.... who knows what else they broke that we haven't discovered yet. RE: T48G backlight BUG - Karl_Yealink - 09-19-2016 04:42 PM There is an new feature call power saving. You can find this feature via web interface. It cause this problem, maybe you can disable then test again. |