Phone - Tones - Country not working firmware 70.0.115 - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +---- Forum: T3xP Series (/forumdisplay.php?fid=22) +---- Thread: Phone - Tones - Country not working firmware 70.0.115 (/showthread.php?tid=200) |
Phone - Tones - Country not working firmware 70.0.115 - amaier - 01-28-2013 03:57 PM Hello, the setting Phone – Tones – Select Country does not work on T38 running 38.70.0.115. Each Country is the same. In version .105 it was working. Best regards Alexander RE: Phone - Tones - Country not working firmware 70.0.115 - Yealink Support - 02-01-2013 07:44 PM (01-28-2013 03:57 PM)amaier Wrote: Hello, Hi, I test a T38G with firmware 38.70.0.115, then I select the country with Australia , then i press the speaker button to check the dial tone, I can hear the long trilled tone of "dudududu..." Then I change the the country with Greece, then press the speaker again, then i can hear different tone. Could you please help test again? Best Regards! Yealink Support Team RE: Phone - Tones - Country not working firmware 70.0.115 - amaier - 02-01-2013 07:56 PM (02-01-2013 07:44 PM)Yealink Support Wrote: Hi, Hi, I just updated a phone from 38.70.0.105 to 38.70.0.115 and confirm it NOT working. I selected germany. If I press the speaker button I hear the german dial tone. But if you dial a number, you get the US ringback tone. Regards Alexander RE: Phone - Tones - Country not working firmware 70.0.115 - amaier - 03-27-2013 02:55 PM Hi, after upgrading to latest 38.70.0.125 it is working again. RE: Phone - Tones - Country not working firmware 70.0.115 - Yealink Support - 04-07-2013 03:22 PM Thanks for your feedback |