Redial after firmware upgrade not working - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: Redial after firmware upgrade not working (/showthread.php?tid=19860) |
Redial after firmware upgrade not working - sinboo50 - 08-07-2016 08:42 PM Firmware upgrades have broken redial since it included IP info now. I have only 1 T48G in a home office. I have read threads that say to solve this with Auto Provision, however I do not use a server and do not Auto Provision. How can I fix redial problem? RE: Redial after firmware upgrade not working - Lucia_Yealink - 09-26-2016 08:24 PM (08-07-2016 08:42 PM)sinboo50 Wrote: Firmware upgrades have broken redial since it included IP info now. Hi Sir, Yes, about your issue, please go to the web interface of the phone, go to Settings->Configure, import the test.cfg in the link, and then click Confirm to save the configure. You can refer to the picture in the link below: http://ftp.yealink.com/?ShareToken=0B8773E59845A8AFB714A2B27817DC54E7DF025A Thank you. |