Yealink Forums
How to auto provision the local directory contacts - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: How to auto provision the local directory contacts (/showthread.php?tid=1973)



How to auto provision the local directory contacts - mcsmith86 - 06-27-2014 06:02 AM

I want to use auto provisioning to load up the extension list on a T42G (all T4x series really). However, I don't see a mechanism in the docs on how to do this.

Worst case scenario I can load the contacts via CSV but then I also need to make sure the setting "Directory > Setting > Directory" includes the "Local Directory" which there doesn't seem to be a configuration directive for.

Ideally I'd load both things via autoprov.


RE: How to auto provision the local directory contacts - Yealink Support - 06-27-2014 02:39 PM

Hi mcsmith86,

Please try follow steps:

1.Add your contacts in the contact.xml file and save it.
Place the common.cfg file and contact.xml file in a http/ftp/tftp server (we recommend http server and I attached the xml file).

[Image: attachment.php?aid=829]

The below picture is correct Autop sentence.

[Image: attachment.php?aid=828]

2.Fill the URL into phone autoprovision server URL field:

[Image: attachment.php?aid=830]

3.Click autoprovision now.
[Image: attachment.php?aid=831]

Best Regards